If you have a new car or have had multi-stage paint correction done, you should apply some protection before dirt, road filth, bugs, and birds get to it. With so many waxes, paint sealants, and ceramic coatings on the market today, this is quite simple.
However, what about stone chips, scuffs, and scratches? You cannot avoid progressive wear and tear if you drive your car every day. The front end will be severely damaged by flying rocks and road debris during lengthy highway commutes and frequent road vacations.
Not even the greatest ceramic coatings applied by professionals can shield your paint from mechanical harm. To preserve the paint underlying the body panels, a thick, clear layer of urethane called Paint Protection in Film Tucson must be placed.
How Do Paint Protection Films Work?
Paint Protection Film Tucson comes in ready-to-use rolls, featuring multiple layers, each designed for a specific purpose.
A release liner at the bottom keeps the other layers clean and protected until installation. When it’s time to apply the Paint Protection Film Tucson, the liner is removed and discarded.
A layer of acrylic adhesive, roughly 1.6 mils thick (0.040 mm), sits in the center. The PPF is completely removed without causing any harm or irreversible changes to the paint because the adhesive that binds it to the clear coat is made to cling to the film.
The urethane layer, measuring about 6 mils (0.152 mm), is the thickest part of the film and performs the main protective function. All of the impact energy is concentrated in a relatively tiny area when a rock hits a sharp edge or point when it travels into the car. Due to its thinness and lack of flexibility, automotive paint will eventually chip away and break. Numerous of these will appear on anything exposed to the airstream after a few years of driving, including the front bumper, fenders, hood, rocker panels, etc.
The paint will never be flawless again when this occurs. The paint will appear fantastic from any reasonable distance if you polish it enough and patch up any chipped spots before reapplying the clear coat. But after a while, repainting the entire panel—which is already costly—becomes more cost-effective.
Paint Protection Film Tucson protects the paint by causing the urethane layer to bend when struck, absorbing some of the force and dispersing the remainder across a much larger area.
Last but not least, contemporary Paint Protection Film Tucson products have a thin, transparent coat layer that is 0.5 mils thick (0.013 mm) and serves to seal and shield the urethane layer from impurities.
Being porous in and of itself, the urethane will eventually discolor the film by capturing tiny particles from the road when it is exposed to the environment. Because of this, PPF products that are older or less expensive eventually become yellow.
The top coat is UV and oxidation-resistant, as well as a variety of airborne contaminants and pollutants.
Self-Healing Function of PPF
Scratches, scuffs, and scrapes will collect on the film, but they will not remain for long. Paint Protection Film Tucson has self-healing properties.
Urethane behaves like a viscous liquid, such as honey, collapsing under pressure to prevent tears and damage. As a thermoplastic polymer, it softens with heat, becoming more pliable and absorbing impact energy. Once heated, the material returns to a smooth, flat state and this process can be repeated endlessly without changing its chemical structure. As it cools, urethane regains its original strength, ensuring long-lasting protection.
When you use a heat pistol to blast the film, scratches, and scuffs vanish in a matter of seconds; it’s almost amazing. Depending on where you live, the film will straighten up and cure most impact zones on a hot, sunny day.
But when it comes to paint protection film, you want to be practical. Although it has its limitations, it will feel like an invincible substance. Naturally, cutting through the film with a knife will rip it apart and sever the paint, thereby damaging the entire panel.
The body panel may potentially sustain a dent from larger blows. You’ll need to go to the body shop to straighten it up, but the paint should be saved as long as they don’t rip through the film.
Conclusion
When you invest in Paint Protection Film Tucson, you provide your vehicle with the ultimate buffer against damage caused by ordinary driving. PPF absorbs the impact of rocks and road debris, reducing chipping and scratches that might damage your car’s paint. Because PPF is self-healing, tiny scratches and abrasions will disappear with heat, leaving your automobile appearing brand new. PPF protects your vehicle from UV rays, dirt, and impurities, preserving its glossy appearance and resale value for years to come, making it an excellent choice for any car owner.
